Rothenberger Rhino Pipe Threader Machine 1/2" to 4" Capacity
   

 

ROTHENBERGER THREADING EQUIPMENT FOR UP TO 4" PIPES

Previous PagePrevious PageNext PageNext page

 


Shown with optional open wheel cart
 

Oiling and Lubrication

  • "Quick Shot" lubricating system.

Oil Reservoir

  • 2 gallons.
  • Use Ro-Cool cutting oil, a special blend of sulfo-chlorinated mineral oil assures long die life and superior quality threads.

Automatic Die Heads

  • Automatic 2 1/2" to 4" standard.
  • 1/2" to 2" automatic die head, small die head adapter, and reamer, optional.
  • Automatically adjusted thread length.
  • Threading range with optional package:
    Pipe or conduit - 1/2" to 4"
    Bolt or rod - 5/8" to 2 1/4".

Safety

  • All units come with safety foot switch.
  • Cut-off switch to limit carriage travel.

Dimensions

  • Length 41 7/16"
  • Width 24"
  • Height 22"

Noise level

  • 85db max.



Rothenberger RHINO logo                                                                            



The RHINO®
1/2" - 4" Threading Machine
 Top quality threading machine for standard use by plumbing and electrical contractors. Complete machine comes standard with 2 1/2" to 4" automatic die head and dies. Optional 1/2" to 2" automatic die head and dies are available.

Drive Motor

  • Heavy Duty, 115 V, universal opt 230V AC/DC 50/60 Hz. Develops up to 3 HP.

  • 6 brush motor for higher torque.

  • High speed threading - 25 rpm.

  • Easy to maintain and service.

Spindle Speed

  • 25 rpm

Pipe Cutter and Reamer

  • Precision pipe cutter with dual guide for accurate pipe cutting and control to achieve precise length required.

  • 5 blade conical reamer for 1/8" to 2" optional blade reamer for 2 1/2" to 4".

Pipe Chuck

  • Collins SUPER GRIP chucking system.
    R/L chucking. 4 double chucks at both front and rear of machine ensure that pipe is automatically gripped and centered. The grip is absolutely non-slip.

  • Chuck jaws are easy to replace.


 Rothenberger Rhino Automatic Die Head
 Alloy Precision Dies

  • Long operating life.

  • Optimum cutting geometry and excellent chip discharge.

Stands

  • Open wheel stand with tool tray.

  • Closed wheel stand with locking tool cabinet.

  • All stands optional equipment at added cost.

 

NEW! Now offering die re-sharpening service for all your High Speed Steel die sets.

 

 The Rhino
 Standard threading machine complete with built in pipe cutter, reamer, foot operated safety switch, 2 1/2" - 4" die heads & dies.

Description
lbs. 		115 V
50/60 Hz 		$
Price		 Buy Now
 RHINO complete machine with 2 1/2" - 4" automatic die heads and dies
 		  340.00  00550 $20,739.90
 
 RHINO optional 1/2" - 2" package with 1/2" - 2" automatic die head and dies  and 1/2" - 2" conical reamer  27.00  00561 $1,928.90

 

 

 

 
 Blade Reamer Assembly 2-1/2" - 4"
 		 5.50 00107 $723.90
 
 1/8" - 2" 5 Blade Conical Reamer
 		 5.50 10060 $781.90
 
 Cutter Assembly
 		 40.00 20160 $2,402.90
 
 Spare Cutter Wheel
 		 1.00 04121 $128.90
 
 Open Wheel Stand (with tool tray)
 		 56.00 00548A $858.90
 
 Footswitch Micro Switch (No need to buy whole new footswitch) 1.00 13841 $83.90  
 Footswitch Complete with cords  8.00 00161 $399.90

 
 Superjack Folding Pipe Stand with Vee Head
 		  25.00  10642 $253.90
 
 Super Jack Pipe Stand with Ball Transfer Head
 		  31.00  00101 $242.00
 
 1/2" - 3/4" NPT Alloy 2.00 89101 $159.90
 
 1/2" - 3/4" NPT High Speed Steel Dies 2.00 89157
(59111)
(56180)		 $441.90
 
 1" - 2" NPT Alloy 3.00 89102 $159.90
 
 1" - 2" NPT High Speed Steel* 2.00 89158
(56112)
(56181)		 $477.90
 
 2-1/2" - 4" NPT (Rhino, Asada 4SE) Alloy Set of 5 4.00 59912 $420.90
 
 2-1/2" - 4" NPT (Rhino, Asada 4SE) HSS* Suitable to thread stainless steel Set of 5
 		 4.00 59997 $638.90
 
 
Rothenberger 4SE, Asada 4S, RHINO, BEAVER

NPSM Threading dies and Die Heads
 
Description No. Price Buy Now
 1/2" to 3/4" NPSM Die Set
 		  89148 $258.90
 
 1" to 1 1/4" NPSM Die Set
 		  89149 $258.90
 
 1-1/2" to 2" NPSM Die Set
 		  89150 $258.90
 
 Dies 2-1/2" - 3" NPSM
 		 89151 $258.90
 
 Die Head 1/2" - 1-1/4" NPSM
 		 20171 $1,029.90
 
 Die Head 1-1/2" - 2" NPSM
 		 20172 $1,029.90
 
       
 

Rothenberger Rocool Cutting Oil

Special blend of sulfo-chlorinated mineral oil assures long die life and superior quality threads. Rocool cutting oil and automatic through-the-die-head oil flow makes it impossible to cut a dry thread.
Oil available in one, five, and fifty gallon containers.
 

Description


lbs.

No.

$
Price

Add to Cart
Rocool Cutting Oil (1 gallon container) 8.00 01922 $51.90  
Rocool Cutting Oil (5 gallon bucket) 41.00 00002 $222.90  
Rocool Cutting Oil (55 gallon drum) 480.00 00003 $1,664.90  
 

Rothenberger Nipple Chucks

 1/2" - 2" Nipple Chucks
  • Nipple chucks convert unthreaded or short pipe lengths into useful close-threaded nipples
  • For 1/2" - 2" pipe - up to schedule 40
  • Faster and more economical to use than nipple chuck adapter systems
Description
lbs. 		No. $
Price		 Add to Cart
Nipple Max Set, 1/2" - 2" 26.00 00089 $3,485.90 

 

 
Nipple Max Set, 2-1/2" - 4" 36.00

00090

$4,756.90

 
 
 

ROTHENBERGER offers a large variety of equipment for the construction & plumbing industry. Both A.C. & D.C. motors. Pipe threaders, groovers, pipe cutters and more! CMS Industrial Equipment Company repairs / rewinds all ROTHENBERGER pipe threaders, and tools. Rebuilds include everything necessary to return your motor to peak condition, including: ARMATURE REWINDING, BEARINGS, FIELD COIL REWINDING, BRUSHES, STATOR REWINDING, CAPACITORS, SWITCHES, MACHINING. Please let us know as much information as you can regarding the motor or part needing service. Call, fax, or e-mail CMS Industrial Equipment Company for an estimate.

 

 

ROTHENBERGER THREADING EQUIPMENT FOR UP TO 4" PIPES

Previous PagePrevious PageNext PageNext page

 
Rothenberger 4" Pipe Threader

All content © Copyright 2024 CMS Industrial Equipment Company